DTC Confirmation Procedure

CHECK SELF DIAGNOSTIC RESULT
CONSULT
1. Ignition switch ON.
2. Select "Self Diagnostic Result " mode of "AIR BAG ".
3. Check DTC.
Is the DTC detected?

YES

(Current DTC) Refer to:
- B00A0-00, -02 or -09: Diagnosis Procedure (B00A0-00, -02 or -09) .
- B00A0-04: Diagnosis Procedure (B00A0-04) .
- B00A0-83, -86, -87, -88 or -8F: Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F) .
- B00A0-93: Diagnosis Procedure (B00A0-93) .
YES

(Past DTC) GO TO 2.

NO

Inspection End.
ERASE SELF DIAGNOSTIC RESULT
CONSULT

Erase DTC.

Can the DTC be erased?

YES

Inspection End.

NO

Refer to:
- B00A0-00, -02 or -09: Diagnosis Procedure (B00A0-00, -02 or -09) .
- B00A0-04: Diagnosis Procedure (B00A0-04) .
- B00A0-83, -86, -87, -88 or -8F: Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F) .
- B00A0-93: Diagnosis Procedure (B00A0-93) .

CHECK SELF DIAGNOSTIC RESULT
CONSULT
1. Ignition switch ON.
2. Check the air bag warning lamp status. Refer to SRS Operation Check .
NOTE: SRS will not enter diagnosis mode if no malfunction is detected in user mode.

Is the DTC detected?

YES

Refer to:
- B00A0-00, -02 or -09: Diagnosis Procedure (B00A0-00, -02 or -09) .
- B00A0-04: Diagnosis Procedure (B00A0-04) .
- B00A0-83, -86, -87, -88 or -8F: Diagnosis Procedure (B00A0-83, -86, -87, -88 or -8F) .
- B00A0-93: Diagnosis Procedure (B00A0-93) .
NO

Inspection End.