DTC Detection Logic
There is a gap between the target phase angle and the detected phase angle when the engine is operating in cold conditions.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
|
|
P052B |
CAMSHAFT POSITION TIMING B1 (Cold start "A" camshaft position timing over-retarded bank 1) |
Diagnosis condition |
-- |
|
Signal (terminal) |
-- |
||
|
Threshold |
There is a gap between the target phase angle and the detected phase angle when the engine is operating in cold conditions |
||
|
Diagnosis delay time |
-- |
||