Method Of Starting

• Diagnosis mode changes from user mode to diagnosis mode when changing operation is performed.
• In user mode, when SRS air bag warning lamp is not turning ON, changing to diagnosis mode by ignition switch operation is not possible.
• In diagnosis mode, when repair is complete and system is normal, the mode changes to user mode when ignition switch is OFF to ON.

Procedure to Change Diagnosis Mode 

1. Ignition switch from OFF to ON.
2. SRS air bag lamp turns ON for 7 second and turns OFF, then ignition switch OFF within 2 second after the lamp turns OFF.
   NOTE: When in Diagnosis Mode, the air bag warning lamp may illuminate for more than 7 seconds after the ignition switch is ON. If this is the case, the ignition switch must still be cycled OFF after 7 seconds.
3. After ignition switch OFF, wait for 3 seconds or more.
4. Repeat operation 1 to 3 for 2 times so that operation 1 to 3 is repeated for 3 times in total.
5. Ignition switch from OFF to ON. Diagnosis mode changes.