Removal and Installation: Installation

WARNING: This page is about a different car, the 2021 Nissan Rogue. However, it is still accessible from the selected car via links, so may be relevant.

Note the following, and install in the reverse order of removal.

Tighten the ADAS control unit 2 nuts to the specified torque.

Nut : 8 N.m (0.82 kg-m, 71 ft-lb)

Courtesy of NISSAN NORTH AMERICA, INC.

CAUTION: Be sure to perform "ADDITIONAL SERVICE WHEN REPLACING ADAS CONTROL UNIT 2" when replacing ADAS control unit 2. Refer to Work Procedure .