Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2021 >> Qashqai SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (1 Of 4) >> Engine (ECM) >> DTC P0113: IAT Sensor >> Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check 1st trip DTC.

    Is 1st trip DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    To check malfunction symptom before repair: Refer to Inspection .

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals