Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Before replacing ADAS control unit, perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to Description .

Remove trunk side finisher (LH). Refer to Removal and Installation .
Remove nuts (A) from ADAS control unit bracket.

Courtesy of NISSAN NORTH AMERICA, INC.
Disconnect harness connector from ADAS control unit and remove ADAS control unit from vehicle.