Removal and Installation: Removal

WARNING: This page is about a different car, the 2018 Nissan Maxima. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Before replacing BCM, perform "Before Replace ECU" of "Read/Write Configuration" to save or print current vehicle specification. Refer to Description .
When replacing the BCM, a new BCM must be used. The functions controlled by the BCM do not operate properly if a BCM from another vehicle is used.

Disconnect negative battery terminal. Refer to Exploded View .
Remove combination meter. Refer to Removal and Installation .
Remove screws (A) using a suitable tool.

Courtesy of NISSAN NORTH AMERICA, INC.
Disconnect harness connectors from the BCM and remove.