Conditions For Turning On Warning Lamps
ABS Warning Lamp
- Turns ON at the same time as SLIP indicator lamp when either ABS function or EBD function is malfunctioning.
- Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
|
Condition (status) |
ABS warning lamp |
|
Ignition switch OFF |
OFF |
|
For approx. 2 seconds after the ignition switch is turned ON |
ON |
|
Approx. 2 seconds after ignition switch is turned ON (when the system is in normal operation) |
OFF |
|
ABS function is malfunctioning |
ON |
|
EBD function is malfunctioning |
ON |
Brake Warning Lamp
- Turns ON at the same time as ABS warning lamp and SLIP indicator lamp when EBD function, motor/accumulator assembly or motor system is malfunctioning.
- Turns ON when ignition switch turns ON and turns OFF when the system is normal, for bulb check purposes.
|
Condition (status) |
Brake warning lamp |
|
Ignition switch OFF |
OFF |
|
For approx. 2 seconds after the ignition switch is turned ON |
ON |
|
Approx. 2 seconds after ignition switch is turned ON (when the system is in normal operation) |
OFF |
|
After engine starts |
OFF |
|
When parking brake operates (parking brake switch ON) |
ON |
|
When brake fluid is less than the specified level (brake fluid level switch ON) |
ON |
|
ABS function is malfunctioning |
OFF |
|
EBD function is malfunctioning |
ON |
|
Accumulator has low pressure |
ON |
|
Motor system is malfunctioning |
ON |
|
Ignition power supply system is malfunctioning |
ON |