DTC Confirmation Procedure
- CHECK SELF DIAGNOSTIC RESULT
CONSULT
- Ignition switch ON.
- Select "Self Diagnostic Result" mode of "AIR BAG"
- Check DTC.
Is the DTC detected?
YES
Refer to DTC Diagnosis Procedure .
YES
GO TO 2.
NO
Inspection End.
- ERASE SELF DIAGNOSTIC RESULT
Erase DTC.
Can the DTC be erased?
YES
Inspection End.
NO
Refer to DTC Diagnosis Procedure .
- CHECK SELF DIAGNOSTIC RESULT
CONSULT
- Ignition switch ON.
- Check the air bag warning lamp status. Refer to SRS Operation Check .
NOTE: SRS will not enter diagnosis mode if no malfunction is detected in user mode.Is the DTC detected?
YES
Refer to DTC Diagnosis Procedure .
NO
Inspection End.