Self Diagnostic Result
Refer to DTC Index .
When "CRNT" is displayed on "Self diagnostic result".
- The system is presently malfunctioning.
When "PAST" is displayed on "Self diagnostic result".
- System malfunction in the past was detected, but the system is presently normal.
Freeze Frame Data (FFD)
When DTC is detected, a vehicle state shown below is recorded and displayed on CONSULT.
|
Item name |
Indication/Unit |
Display item |
|
ODO/TRIP METER |
km |
Total mileage (odometer value) of the moment a particular DTC is detected. |
|
DTC LOCAL CODE |
-- |
Displays but not used. |
|
IGN VOLT |
V |
Displays the ignition switch ON power supply voltage. |
|
CAN DIAG STATUS |
On / Off |
Displays the CAN network diagnosis status. |
|
VEHICLE SPEED |
km/h |
Displays the vehicle speed. |
|
FR WHEEL SPEED |
RPM |
Displays the rotational speed of front RH tire. |
|
FL WHEEL SPEED |
RPM |
Displays the rotational speed of front LH tire. |
|
RR WHEEL SPEED |
RPM |
Displays the rotational speed of rear RH tire. |
|
RL WHEEL SPEED |
RPM |
Displays the rotational speed of rear LH tire. |
|
STEERING ANG SENSOR |
deg |
Displays the steering angle from the steering angle sensor. |
|
DECEL G SENSOR |
G |
Displays the decel G. |
|
SIDE G SENSOR |
G |
Displays the side G. |
|
YAW RATE SENSOR |
deg/s |
Displays the yaw rate. |
|
ACCELE PEDAL POSITION |
% |
Displays the accelerator pedal position. |
|
SHIFT POSITION |
-- |
Displays but not used. |
|
BRAKE SWITCH 2 |
On / Off |
Displays the brake pedal operation status. |
|
BRAKE SWITCH 1 |
On / Off |
Displays the brake pedal operation status. |
|
STOP LAMP SW |
ACT / INACT |
Displays the stop lamp switch status. |
|
PRESS SENSOR |
bar |
Displays the brake fluid pressure. |
|
ABS |
ACT / INACTIVE |
Displays the ABS function status. |
|
ABS MALF |
On / Off |
Displays the ABS malfunction status. |
|
TCS |
ACT / INACTIVE |
Displays the TCS function status. |
|
TCS MALF |
On / Off |
Displays the TCS malfunction status. |
|
VDC |
ACT / INACTIVE |
Displays the VDC function status. |
|
VDC MALF |
On / Off |
Displays the VDC malfunction status. |
|
VDC OFF SWITCH |
On / Off |
Displays the VDC OFF switch status. |
|
AEB CVT PERMIT |
On / Off |
Displays the transaxle authorized state for intelligent engine brake function. |
|
Buckle SW |
On / Off |
Displays the seat belt buckle switch (driver side) status. |
|
VDC (ABH active) |
Possible / Impossi |
Displays the automatic brake hold active status at ABS actuator and electric unit (control unit). |
|
ABH (CCM) |
On / Off |
Displays the brake hold status at automatic brake hold. |
|
Slope |
Slow / Steep |
Displays the slope status. |
|
PB active request (VDC) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module from ABS actuator and electric unit (control unit). |
|
CCM (VDC) |
Normal / Abnormal |
Displays the chassis control module (with built in steering angle sensor) status detected by ABS actuator and electric unit (control unit). |
|
PB active request (CCM) |
REQ / NO REQ |
Displays the parking brake active request status to electric parking brake control module (with built in steering angle sensor) from chassis control module. |
|
PB SW |
Off / Release |
Displayed the electric parking brake switch status. |
|
ABH active request (CCM) |
REQ / NO REQ |
Displays the automatic brake hold active request status to ABS actuator and electric unit (control unit) from chassis control module (with built in steering angle sensor). |
|
ABH malfunction |
Normal / Abnormal |
Displays the automatic brake hold status. |
|
ABH indicator lamp |
Off / On 1 / On 2 |
Displays the automatic brake hold indicator lamp status. |
|
ABH active request (ADAS) 1 |
-- |
Displays but not used. |
|
PB |
RLS 1 / RLS 2 / APP 1 / APP 2 |
Displays the electric parking brake status. |
|
CCM (PB) |
Normal / Abnormal |
Displays the chassis control module (with built in steering angle sensor) status detected by electric parking brake control module. |
|
PB (ABH active) |
Possible / Impossi |
Displays the automatic brake hold active status at electric parking brake control module. |
|
PB malfunction status |
Normal / ABN 1 / ABN 2 / Not used |
Displays the electric parking brake status. |
|
ABH active request (ADAS) 2 |
-- |
Displays but not used. |
|
ABH active request (ADAS) 3 |
-- |
Displays but not used. |
|
ADAS |
-- |
Displays but not used. |
|
ABH (ADAS) |
-- |
Displays but not used. |
|
ABH SW |
On / Off |
Displays the automatic brake hold switch status. |
|
ABH SW indicator lamp |
On / Off |
Displays the automatic brake hold switch indicator status. |
|
ABH active judge (CCM) |
OK / NG |
Displays the judgement of automatic brake hold active states. |