Conditions of Vehicle (Operating Conditions)
- "ENGINE START BY I-KEY" in "Work Support" mode of "BCM (INTELLIGENT KEY)" is ON when setting on CONSULT.
- One or more of Intelligent Keys with registered Intelligent Key ID is in the vehicle.
- PERFORM WORK SUPPORT
CONSULT
Select "INSIDE ANT DIAGNOSIS" in "Work support" mode of "BCM (INTELLIGENT KEY)".
Refer to CONSULT Function (BCM - INTELLIGENT KEY) .
GO TO 2.
- SELF DIAGNOSTIC RESULT
Select "Self Diagnostic Result" mode of "BCM".
Are any DTCs detected?
YES
Refer to DTC Index .
NO
GO TO 3.
- CHECK PUSH-BUTTON IGNITION SWITCH
Check push-button ignition switch.
Refer to Component Function Check .
Is the operation normal?
YES
GO TO 4.
NO
Repair or replace malfunctioning parts.
- CONFIRM THE OPERATION
Confirm the operation again.
Is the inspection normal?
YES
Check intermittent incident. Refer to Intermittent Incident .
NO
GO TO 1.