Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2021 >> Armada SL, RWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (1 Of 5) >> Engine (ECM) >> DTC P0103: MAF Sensor >> Confirmation Procedure

Confirmation Procedure

  1. PRECONDITIONING 

    If DTC Confirmation Procedure has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. PERFORM DTC CONFIRMATION PROCEDURE -I 
    1. Turn ignition switch ON and wait at least 5 seconds.
    2. Check DTC.

    Is DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    GO TO 3.

  3. PERFORM DTC CONFIRMATION PROCEDURE -II 
    1. Start engine and wait at least 5 seconds.
    2. Check DTC.

    Is DTC detected?

    YES

    Refer to DTC Diagnosis Procedure .

    NO

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals