Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2020 >> Rogue SL, AWD >> Repair and Diagnosis >> Steering >> Steering Control Systems >> Steering Control System (DTC/Circuit Diagnosis) >> DTC/Circuit Diagnosis >> DTC C1608: EPS Control Unit >> Diagnosis Procedure

Diagnosis Procedure

  1. CHECK TERMINALS AND HARNESS CONNECTORS 

    Check EPS control unit pin terminals for damage or loose connection with harness connector. If any items are damaged, repair or replace malfunctioning parts.

    Is the inspection result normal?

    YES

    GO TO 2.

    NO

    Repair or replace malfunctioning parts.

  2. PERFORM SELF-DIAGNOSIS 

    SYMBOL With CONSULT

    1. Erase "Self Diagnostic Result" for "EPS".
    2. Turn the ignition switch OFF, and then wait 10 seconds and more.
    3. Perform "Self Diagnostic Result" for "EPS".

    Is DTC "C1607" or "C1608" detected?

    YES

    EPS control unit is malfunctioning. Replace steering column assembly. Refer to Removal and Installation .

    NO

    Check intermittent incident. Refer to Intermittent Incident .

scientia non olet · About Mike's Workshop Manuals