Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2020 >> 370Z Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2017 Nissan 370Z and 2016 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    Perform "INSIDE ANT DIAGNOSIS" on Work Support of "INTELLIGENT KEY".

    Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) (FOR COUPE) .

    GO TO STEP 2  .

  2. PERFORM SELF-DIAGNOSTIC RESULT

    Perform Self-Diagnostic Result of "BCM".

    Is DTC detected?

    YES 

    Refer to DTC LOGIC (console) or DTC LOGIC (trunk room).

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch.

    Refer to COMPONENT FUNCTION CHECK .

    Is the operation normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the inspection normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 1  .

scientia non olet · About Mike's Workshop Manuals