Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2020 >> 370Z Base, Automatic Trans >> Repair and Diagnosis >> External Pages >> Different car >> Section 4 (Body Control System) >> System Description >> Diagnosis System (BCM) >> Air Pressure Monitor >> Consult Function >> Function

Consult Function: Function

WARNING: This page is about a different car, the 2017 Nissan 370Z and 2016 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.

The diagnosis functions (main functions) include the following: "WORK SUPPORT", "SELF DIAGNOSTIC RESULT", "DATA MONITOR" and "ACTIVE TEST".

Diagnostic test mode Function
Work support In this mode, it is possible to make quick and accurate adjustments by following the instructions on the CONSULT display.
Self diagnostic result Receives self-diagnosis results from the BCM, and indicates DTCs and the number of malfunctions.
Data monitor Receives input/output signals from the BCM and indicates and stores them to facilitate locating the causes of malfunctions.
Active test Transmits command to the BCM to change output signals and check operation of output system.
scientia non olet · About Mike's Workshop Manuals