Diagnostic Test
WARNING: This page is about a different car, the 2017 Nissan 370Z and 2016 Nissan 370Z. However, it is still accessible from the selected car via links, so may be relevant.
- SAVING VEHICLE SPECIFICATION (BCM)
CONSULT Configuration
Perform "Before Replace ECU" of "Read / Write Configuration" to save or print current vehicle specification. Refer to DESCRIPTION .
NOTE:If "Before Replace ECU" of "Read / Write Configuration" cannot be used, use the "Manual Configuration" after replacing BCM.
GO TO STEP 2 .
- REPLACE BCM
Replace BCM. Refer to REMOVAL AND INSTALLATION .
GO TO STEP 3 .
- WRITING VEHICLE SPECIFICATION
Perform "After Replace ECU" of "Read / Write Configuration" or "Manual Configuration" to write vehicle specification. Refer to DESCRIPTION .
GO TO STEP 4 .
- INITIALIZE BCM (NATS) (IF EQUIPPED)
Perform BCM initialization. (NATS)
WORK END