Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2020 >> 370Z Base, Automatic Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (2 Of 3) >> Engine (ECM) >> DTC P0500: VSS >> DTC Description >> A/T models >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC P0500 is displayed with DTC UXXXX, first perform the trouble diagnosis for DTC UXXXX.
  • If DTC P0500 is displayed with DTC P0607, first perform the trouble diagnosis for DTC P0607. Refer to DTC Description .

DTC No.

Trouble diagnosis

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0500

VEH SPEED SEN/CIRC

(Vehicle speed sensor)

At 20 km/h (13 MPH), ECM detects the following status continuously for 5 seconds or more: The difference between a vehicle speed calculated by a output speed sensor transmitted from TCM to ECM via CAN communication and the vehicle speed indicated on the combination meter exceeds 15 km/h (10 MPH).

  • Harness or connector

    (The CAN communication line is open or shorted.)

  • Combination meter
  • ABS actuator and electric unit (control unit)
  • Wheel sensor
  • TCM
  • Output speed sensor