Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2019 >> Versa Note S >> Repair and Diagnosis >> External Pages >> Different car >> Section 62 (Power Control System (Power Distribution System) (DTC/Circuit Diagnosis)) >> DTC/Circuit Diagnosis >> Push-Button Ignition Switch >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2017 Nissan Versa Note. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK FUNCTION

    1. Select PUSH SW in Data Monitor of BCM with CONSULT.
    2. Check the push-button ignition switch signal under the following conditions.
    Test item Condition Status
    PUSH SW Push-button ignition switch is pressed On
    Push-button ignition switch is not pressed Off

    Is the indication normal?

    YES 

    Inspection End.

    NO 

    Go to DIAGNOSIS PROCEDURE .

scientia non olet · About Mike's Workshop Manuals