Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2019 >> Versa Note S >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (3 Of 3) >> DTC/Circuit Diagnosis >> Cooling Fan >> Component Function Check

Component Function Check

  1. CHECK COOLING FAN FUNCTION 

    SYMBOL With CONSULT

    1. Turn ignition switch ON.
    2. Perform "COOLING FAN" in "ACTIVE TEST" mode with CONSULT.
    3. Touch "LOW" and "Hi" on the CONSULT screen.
    4. Check that cooling fan operates.
    NOTE: The cooling fan operates at high speeds even when "LOW" is selected in CONSULT "ACTIVE TEST". (For single connector cooling fan with M/T models)

    SYMBOL Without CONSULT

    1. Perform IPDM E/R auto active test and check cooling fan motor operation. Refer to Diagnosis Description .
    2. Check that cooling fan operates.

    Is the inspection result normal?

    YES

    INSPECTION END

    NO

    Refer to Diagnosis Procedure .

scientia non olet · About Mike's Workshop Manuals