Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2019 >> Qashqai SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Steering Control System (DTCS)) >> DTC Diagnosis >> EPS/DAST 3 (EPS Control Unit) >> DTC C1608: EPS Control Unit >> Confirmation Procedure >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2020 Nissan Rogue Sport and 2020 Nissan Qashqai. However, it is still accessible from the selected car via links, so may be relevant.
  1. PRECONDITIONING 

    If "DTC CONFIRMATION PROCEDURE" has been previously conducted, always turn ignition switch OFF and wait at least 10 seconds before conducting the next test.

    GO TO 2.

  2. DTC REPRODUCTION PROCEDURE 

    SYMBOL With CONSULT

    1. Turn the ignition switch OFF to ON.
    2. Perform "EPS/DAST 3" self-diagnosis.

    Is "C1608" detected?

    YES

    Proceed to diagnosis procedure. Refer to DTC Diagnosis Procedure ..

    NO

    To check malfunction symptom before repair:Refer to Inspection ..

    NO

    Confirmation after repair: INSPECTION END

scientia non olet · About Mike's Workshop Manuals