Active Test
- Never perform "Active Test" while driving the vehicle.
- The "Active Test" cannot be performed when the following systems malfunction is displayed.
- ICC system
- LDW
- I-LI
- Blind Spot Warning
- The "Active Test" cannot be performed when the AEB warning lamp is illuminated.
- Shift the selector lever to "P" position, and then perform the test.
|
Test item |
Description |
|
STOP LAMP |
The brake hold drive signal can be operated by ON/OFF operations as necessary, and the stop lamp can be illuminated |
|
ICC BUZZER |
Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
|
BRAKE ACTUATOR |
Activates the brake by an arbitrary operation |
|
LDP BUZZER |
Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
|
LDP ON IND |
The I-LI system display can be illuminated by ON/OFF operations as necessary |
|
LANE DEPARTURE W/L |
The LDW/I-LI warning can be illuminated by ON/OFF operations as necessary |
|
BSW WARNING LAMP |
The Blind Spot Warning system display can be illuminated by ON/OFF operations as necessary |
|
BSW ON INDICATOR |
The Blind Spot Warning system display can be illuminated by ON/OFF operations as necessary |
|
LDW ON INDICATOR |
The LDW system display can be illuminated by ON/OFF operations as necessary |
|
LDP WARNING INDICATOR |
The I-LI malfunction can be illuminated by ON/OFF operations as necessary |
|
LDW WARNING INDICATOR |
The LDW malfunction can be illuminated by ON/OFF operations as necessary |
|
Vibration motor |
The steering vibration motor can be operated ON/OFF |
|
RAB warning lamp (operation) |
The RAB system display can be illuminated by ON/OFF operations as necessary |
|
RAB warning lamp (malfunction) |
The RAB malfunction can be illuminated by ON/OFF operations as necessary |
|
ADAS buzzer 2 |
Sounds a buzzer used for following systems by arbitrarily operating ON/OFF
|
STOP LAMP
|
Test item |
Operation |
Description |
Stop lamp |
|
STOP LAMP |
Off |
Stops transmitting the brake hold drive signal to end the test |
OFF |
|
On |
Transmits the brake hold drive signal |
ON |
ICC BUZZER
|
Test item |
Operation |
Description |
Operation sound |
|
ICC BUZZER |
MODE1 |
Transmits the buzzer output signals to the ADAS control unit via ITS communication |
Intermittent beep sound |
|
Test start |
Starts the tests of "MODE1" |
-- |
|
|
Reset |
Stops transmitting the buzzer output signal to end the test |
-- |
|
|
End |
Returns to the "SELECT TEST ITEM" screen |
-- |
BRAKE ACTUATOR
|
Test item |
Operation |
Description |
"PRESS SENS" value |
|
BRAKE ACTUATOR |
MODE1 |
Transmits the brake fluid pressure control signal to the ABS actuator and electric unit (control unit) via CAN communication |
10 bar |
|
MODE2 |
20 bar |
||
|
MODE3 |
30 bar |
||
|
Test start |
Starts the tests of "MODE1", "MODE2" and "MODE3" |
-- |
|
|
Reset |
Stops transmitting the brake fluid pressure control signal to end the test |
-- |
|
|
End |
Returns to the "SELECT TEST ITEM" screen |
-- |
LDP BUZZER
|
Test item |
Operation |
Description |
Warning buzzer |
|
LDP BUZZER |
Off |
Stops transmitting the warning buzzer signal to end the test |
-- |
|
On |
Transmits the warning buzzer signal to the warning system buzzer |
ON |
LDP ON IND
|
Test item |
Operation |
Description |
I-LI system display (Green) |
|
LDP ON IND |
Off |
Stops transmitting the meter display signal to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
LANE DEPARTURE W/L
|
Test item |
Operation |
Description |
Lane departure system display (Yellow) |
|
LANE DEPARTURE W/L |
Off |
Stops transmitting the meter display signal to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
BSW ON LAMP
|
Test item |
Operation |
Description |
Lane departure system display (Yellow) |
|
BSW ON INDICATOR |
Off |
Stops transmitting the meter display signal below to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
LDW ON INDICATOR
|
Test item |
Operation |
Description |
LDW system display (White) |
|
LDW ON INDICATOR |
Off |
Stops transmitting the meter display signal to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
LDP WARNING INDICATOR
|
Test item |
Operation |
Description |
I-LI malfunction (Yellow) |
|
LDP WARNING INDICATOR |
Off |
Stops transmitting the meter display signal to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
LDW WARNING INDICATOR
|
Test item |
Operation |
Description |
LDW malfunction (Yellow) |
|
LDW WARNING INDICATOR |
Off |
Stops transmitting the meter display signal to end the test |
-- |
|
On |
Transmits the meter display signal to the combination meter via CAN communication |
ON |
VIBRATION MOTOR
|
Test item |
Operation |
Description |
Vibration motor |
|
Vibration motor |
Off |
Stops sending the steering vibration motor signal to end the test |
OFF |
|
On |
Transmits the steering vibration motor signal |
ON |