DTC Index
|
CONSULT display |
Fail-safe |
TIME NOTE |
Refer to |
|
|
No DTC is detected. Further testing may be required. |
-- |
-- |
-- |
-- |
|
U1000: CAN COMM CIRCUIT |
x |
CRNT |
1 - 39 |
|
|
U1010: CONTROL UNIT (CAN) |
x |
CRNT |
1 - 39 |
|
|
B2098: IGN RELAY ON |
x |
CRNT |
1 - 39 |
|
|
B2099: IGN RELAY OFF |
-- |
CRNT |
1 - 39 |
|
|
B20A1: ECM RELAY ON CIRCUIT |
-- |
CRNT |
1 - 39 |
|
|
B20A2: ECM RELAY OFF CIRCUIT |
-- |
CRNT |
1 - 39 |
|
|
B20A3: ETC RELAY STUCK ON |
-- |
CRNT |
1 - 39 |
|
|
B20A4: ETC RELAY STUCK OFF |
-- |
CRNT |
1 - 39 |
|
|
B20A5: FUEL PUMP RELAY STUCK ON |
-- |
CRNT |
1 - 39 |
|
|
B20A6: FUEL PUMP RELAY STUCK OFF |
-- |
CRNT |
1 - 39 |
|
|
B20A7: IPDM EXTERNAL MALF FOR IGN |
-- |
CRNT |
1 - 39 |
|
|
B20A8: IPDM EXTERNAL MALF FOR ST1 |
-- |
CRNT |
1 - 39 |
|
|
B20A9: IPDM EXTERNAL MALF FOR ST2 |
-- |
CRNT |
1 - 39 |
|
|
B210B: INHIBIT relay ON stuck failure |
-- |
CRNT |
1 - 39 |
|
|
B210C: INHIBIT relay OFF stuck failure |
-- |
CRNT |
1 - 39 |
|
|
B210D: STARTER relay ON stuck failure |
-- |
CRNT |
1 - 39 |
|
|
B210E: STARTER relay OFF stuck failure |
-- |
CRNT |
1 - 39 |
|
|
B210F: Interlock/NP switch ON stuck failure |
-- |
CRNT |
1 - 39 |
|
|
B2110: Interlock/NP switch OFF stuck failure |
-- |
CRNT |
1 - 39 |
|
- CRNT: The malfunctions that are detected now
- 1 - 39: The number is indicated when it is normal at present and a malfunction was detected in the past. It increases like 0 → 1 → 2... 38 → 39 after returning to the normal condition whenever IGN OFF → ON. It is fixed to 39 until the self-diagnosis results are erased if it is over 39. It returns to 0 when a malfunction is detected again in the process.