Component Inspection

1. Turn ignition switch OFF.
2. Disconnect malfunctioning door switch connector.
3. Check continuity between door switch terminals.

   Door switch			Condition		Continuity
   Terminal
   Front door switch LH	3	Ground part of door switch	Door switch	Pressed	No
   				Released	Yes
   Front door switch RH				Pressed	No
   				Released	Yes
   Rear door switch LH				Pressed	No
   				Released	Yes
   Rear door switch RH				Pressed	No
   				Released	Yes

Is the inspection result normal?

YES

Inspection End.

NO

Replace malfunction door switch.