DTC Confirmation Procedure
WARNING: This page is about a different car, the 2018 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE 1
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.
- Selector lever: In the P position
- Brake pedal: Depressed
- Check DTC in "Self diagnostic result" mode of "IPDM E/R" using CONSULT.
Is DTC detected?
YES
Go to Diagnosis Procedure .
NO
GO TO 2.
- Press push-button ignition switch under the following conditions to start engine, and wait 1 second or more.
- PERFORM DTC CONFIRMATION PROCEDURE 2
- Stop engine.
- Perform DTC CONFIRMATION PROCEDURE for DTC P1610. Refer to DTC Description .
- Turn ignition switch ON.
- Check DTC in "Self diagnostic result" mode of "IPDM E/R" using CONSULT.
Is DTC detected?
YES
Refer to Diagnosis Procedure .
NO
Inspection End.