Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2018 >> Pathfinder SL, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 33 (Security Control System (Without Intelligent Key System)) >> Without Intelligent Key System >> DTC/Circuit Diagnosis >> B210B Starter Control Relay >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2018 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.
  1. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch under the following conditions to start engine, and wait 1 second or more.
      • Selector lever: In the P position
      • Brake pedal: Depressed
    2. Check DTC in "Self diagnostic result" mode of "IPDM E/R" using CONSULT.

    Is DTC detected?

    YES

    Go to Diagnosis Procedure .

    NO

    Inspection End.

scientia non olet · About Mike's Workshop Manuals