Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2018 >> NV200 S >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (1 Of 3) >> DTC/Circuit Diagnosis >> DTC P0012: Intake Valve Timing Control >> DTC Description >> DTC Detection Logic

DTC Detection Logic

NOTE: If DTC P0012 is displayed with DTC P0075, first perform the trouble diagnosis for DTC Description .

DTC No.

CONSULT screen terms

(Trouble diagnosis content)

DTC detecting condition

Possible cause

P0012

A camshaft position B1

("A" camshaft position - timing over-retarded bank1)

During the retarded control of intake valve timing control the angle difference between actual angle and target angle is 13 degrees or more.
  • Crankshaft position sensor (POS)
  • Camshaft position sensor (PHASE)
  • Intake valve control solenoid valve
  • Accumulation of debris to the signal pick-up portion of the camshaft
  • Timing chain installation
  • Foreign matter caught in the oil groove for intake valve timing control
scientia non olet · About Mike's Workshop Manuals