DTC Detection Logic
The comparison result of signals transmitted to ECM from each temperature sensor (IAT sensor, ECT sensor, FTT sensor, and EOT sensor) shows that the voltage signal of the ECT sensor is higher/lower than that of other temperature sensors when the engine is started with its cold state.
|
DTC |
CONSULT screen terms (Trouble diagnosis content) |
DTC detection condition |
||
|
P0116 |
ECT SEN/CIRC (Engine coolant temperature sensor 1 circuit range/performance) |
A |
Diagnosis condition |
- |
|
Signal (terminal) |
Voltage signal transmitted from ECT sensor to ECM |
|||
|
Threshold |
The comparison result of signals transmitted to ECM from each temperature sensor (IAT sensor, ECT sensor, FTT sensor, and EOT sensor) shows that the voltage signal of the ECT sensor is higher/lower than that of other temperature sensors when the engine is started with its cold state |
|||
|
Diagnosis delay time |
- |
|||
|
B |
Diagnosis condition |
- |
||
|
Signal (terminal) |
Voltage signal transmitted from ECT sensor to ECM |
|||
|
Threshold |
Engine coolant temperature signal from engine coolant temperature sensor does not fluctuate, even when some time has passed after starting the engine with pre-warming up condition. |
|||
|
Diagnosis delay time |
- |
|||