DTC Detection Logic
There is a gap between angle of target and phase-control angle degree.
|
DTC No. |
Trouble diagnosis (Trouble diagnosis content) |
Detecting condition |
Possible cause |
|
P0016 |
Crankshaft position B1 sensor A (Crankshaft position - camshaft position correlation bank 1 sensor A) |
Diagnosis condition |
- |
|
Signal (terminal) |
Camshaft position sensor signal |
||
|
Threshold |
During the diagnosis of alignment of intake valve timing control, the angle difference between actual angle and target angle is 13 degrees or more. |
||
|
Diagnosis delay time |
0.3 seconds or more |