Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2018 >> Kicks S >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System - DTCS P0441 To P1575 >> DTC P050B: Cold Start Control >> DTC Diagnosis Procedure

DTC Diagnosis Procedure

  1. PERFORM IDLE AIR VOLUME LEARNING 

    Perform Description .

    Is Idle Air Volume Learning carried out successfully?

    YES

    GO TO 2.

    NO

    Follow the instruction of Idle Air Volume Learning.

  2. CHECK Intake system 

    Check for the cause of intake air volume lacking. Refer to the following.

    • Crushed intake air passage
    • Intake air passage clogging
    • Clogging of throttle body

    Is the inspection result normal?

    YES

    GO TO 3.

    NO

    Repair or replace malfunctioning part

  3. CHECK FUEL INJECTION SYSTEM FUNCTION 

    Perform DTC Confirmation Procedure for DTC P0171. Refer to DTC Description .

    Is the inspection result normal?

    YES

    GO TO 4.

    NO

    Go to Diagnosis Procedure for DTC P0171.

  4. PERFORM DTC CONFIRMATION PROCEDURE 
    1. Turn ignition switch ON.
    2. Erase DTC.
    3. Perform DTC Confirmation Procedure.

      See DTC Confirmation Procedure .

    Is the 1st trip DTC P050B displayed again?

    YES

    GO TO 5.

    NO

    INSPECTION END

  5. REPLACE ECM 

    Replace ECM. Refer to Removal and Installation .

    INSPECTION END