Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2018 >> Altima S >> Repair and Diagnosis >> Electrical >> Body Electrical >> Power Control System (Power Distribution System) >> Power Distribution System >> DTC/Circuit Diagnosis >> DTC B26F6: BCM >> DTC Description >> DTC Detection Logic

DTC Detection Logic

NOTE:
  • If DTC B26F6 is displayed with DTC U1000, first perform the trouble diagnosis for DTC U1000. Refer to DTC Logic .
  • If DTC B26F6 is displayed with DTC U1010, first perform the trouble diagnosis for DTC U1010. Refer to DTC Logic .

CONSULT Display

DTC Detection Condition

Possible Cause

BCM

[B26F6]

Ignition relay ON signal is not transmitted from IPDM E/R (CAN) when BCM turns ignition relay ON.
  • Harness or connectors.
  • BCM.
  • IPDM E/R.
scientia non olet · About Mike's Workshop Manuals