Detailed Flow
- OBTAIN INFORMATION ABOUT SYMPTOM
Interview the customer to obtain as much information as possible about the conditions and environment under which the malfunction occurred.
GO TO STEP 2 .
- CHECK SYMPTOM
- Check the symptom based on the information obtained from the customer.
- Check if any other malfunctions are present.
GO TO STEP 3 .
- CHECK CONSULT SELF-DIAGNOSIS RESULTS
- Connect CONSULT and perform self-diagnosis. Refer to DTC INDEX (Type A) or DTC INDEX (Type B).
- When DTC is detected, follow the instructions below:
- Record DTC and Freeze Frame Data.
Are self-diagnosis results normal?
YES
GO TO STEP 4 .
NO
GO TO STEP 5 .
- NARROW DOWN MALFUNCTIONING PARTS BY SYMPTOM DIAGNOSIS
Perform symptom diagnosis and narrow down the malfunctioning parts.
GO TO STEP 5 .
- REPAIR OR REPLACE MALFUNCTIONING PARTS
Repair or replace malfunctioning parts.
NOTE:If DTC is displayed, erase DTC after repairing or replacing malfunctioning parts.
GO TO STEP 6 .
- FINAL CHECK
Check that the warning buzzer in the combination meter operates normally.
Does it operate normally?
YES
Inspection End.
NO
GO TO STEP 1 .