Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Sentra SR Turbo, Automatic CVT Trans >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTCS) (1.6L) (2 Of 4) >> DTC/Circuit Diagnosis >> DTC P0365: Exhaust Valve Timing Control Position Sensor >> DTC Logic >> DTC Detection Logic

DTC Detection Logic

DTC No. CONSULT screen terms
(Trouble diagnosis content)		 DTC detecting condition Possible cause
P0365 CMP SEN/CIRC-B1
(Camshaft position sensor circuit bank 1)
  • EVT control position sensor signal is not sent to ECM during engine cranking.
  • EVT control position sensor signal is not sent to ECM during engine running.
  • The pulse signal sent from the EVT control position sensor to ECM is not in the normal pattern during engine running.
  • Harness or connectors
    • Exhaust valve timing control position sensor circuit is open or shorted.
    • Sensor power supply 2 circuit is shorted.
  • Exhaust valve timing control position sensor
  • Exhaust camshaft
  • Starter motor
  • Starting circuit
  • Battery deterioration
  • Sensor power supply 1 circuit sensors
scientia non olet · About Mike's Workshop Manuals