Additional Service When Replacing TCU: Procedure

WARNING: This page is about a different car, the 2016 Nissan Sentra. However, it is still accessible from the selected car via links, so may be relevant.

READING OF VIN DATA

CONSULT work support

Select "SAVE VIN DATA", "START SAVE VIN DATA" then "YES" on START SAVE VIN DATA screen to save the VIN data stored in replaced TCU in CONSULT. If it cannot be saved, writing operation must be performed manually.

GO TO STEP 2 .

TCU REMOVE

Remove TCU. Refer to REMOVAL AND INSTALLATION .

GO TO STEP 3 .

NOTICE TO CARRIER "CONTINENTAL HELP DESK"

Contact CONTINENTAL to have the malfunctioning TCU repaired.

NOTE:
The telematics system cannot be used when TCU is under repair

The repaired TCU is back.

GO TO STEP 4 .

TCU INSTALL

Install TCU. Refer to REMOVAL AND INSTALLATION .

Can ID data be saved to CONSULT at 1st step?

YES

GO TO STEP 5 .

NO

GO TO STEP 6 .

AUTOMATIC WRITING OF VIN DATA TO TCU

CONSULT work support

Select "WRITE VIN DATA", "WRITE SAVED VIN DATA" then "YES" at WRITE SAVED VIN DATA screen to write the VIN data saved in CONSULT into new TCU.

GO TO STEP 7 .

MANUAL WRITING OF VIN DATA TO TCU

CONSULT work support

Select "WRITE VIN DATA (MANUAL)", "WRITE VIN DATA" then "START" on changing screen to write the VIN data saved into new TCU.

GO TO STEP 7 .

USER INFORMATION UPDATE

Update each ID according to the repair record from CONTINENTAL.
- Replace SIM card: ICC ID update
- Replace TCU: TCU ID update
GO TO STEP 8 .

TCU ACTIVATION

CONSULT work support

Select "TCU ACTIVATE SETTING", then "ON" on changing screen to activate TCU.

GO TO STEP 9 .

CONFIRMATION OF OPERATION

Operate the telematics switch to check that the connection to the operator is established.

Is communication test result normal?

Abnormal

GO TO STEP 6 .

Normal

operation end.