Symptom Table

Perform the data monitor of CONSULT to check for any malfunctioning item.

Check the malfunction combinations.

Malfunction item:

Malfunction combination	Data monitor item
Malfunction combination	FR WIPER HI	FR WIPER LOW	FR WASHER SW	FR WIPER INT	INT VOLUME	TURN SIGNAL R	TURN SIGNAL L	TAIL LAMP SW	HI BEAM SW	HEAD LAMP SW 1	HEAD LAMP SW 2	PASSING SW	AUTO LIGHT SW	FR FOG SW
A		*	*			*	*
B	*			*						*		*
C					*				*		*
D					*			*					*
E					*									*
F	*				*
G			*		*
H		*		*									*
I							*				*	*		*
J						*		*	*	*
K	All Items
L	If only one item is detected or the item is not applicable to the combinations A to K

Identify the malfunctioning part from the agreed combination and repair or replace the part.

Malfunction combination	Malfunctioning part	Repair or replace
A	Combination switch INPUT 1 circuit	Inspect the combination switch input circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
B	Combination switch INPUT 2 circuit
C	Combination switch INPUT 3 circuit
D	Combination switch INPUT 4 circuit
E	Combination switch INPUT 5 circuit
F	Combination switch OUTPUT 1 circuit	Inspect the combination switch output circuit applicable to the malfunctioning part. Refer to DIAGNOSIS PROCEDURE .
G	Combination switch OUTPUT 2 circuit
H	Combination switch OUTPUT 3 circuit
I	Combination switch OUTPUT 4 circuit
J	Combination switch OUTPUT 5 circuit
K	BCM	Replace BCM. Refer to REMOVAL AND INSTALLATION .
L	Combination switch	Replace the combination switch.