Component Function Check
WARNING: This page is about a different variant/trim than selected.
- CHECK FUNCTION
CONSULT
- Select "DOOR LOCK" of "BCM".
- Select "DOOR SW-DR", "DOOR SW-AS", "DOOR SW-RL", "DOOR SW-RR", in "Data Monitor" mode.
- Check that the function operates normally according to the following conditions:
Monitor item Condition Status DOOR SW-DR Front door LH Open On Closed Off DOOR SW-AS Front door RH Open On Closed Off DOOR SW-RL Rear door LH Open On Closed Off DOOR SW-RR Rear door RH Open On Closed Off Is the inspection result normal?
YES
Door switch is OK.
NO
Refer to DIAGNOSIS PROCEDURE .