Fuel Pressure Release

With CONSULT

1. Perform INSPECTION MODE 5. Refer to DESCRIPTION .
2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode of "ENGINE" using CONSULT.
3. Start engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.

Without CONSULT

1. Remove fuel pump fuse located in IPDM E/R.
   • Refer to WIRING DIAGRAM for the fuse number.
   • Refer to IPDM E/R TERMINAL ARRANGEMENT for the fuse arrangement.
2. Perform INSPECTION MODE 5. Refer to DESCRIPTION .
3. Start engine.
4. After engine stalls, crank it two or three times to release all fuel pressure.
5. Turn ignition switch OFF.
6. Reinstall fuel pump fuse after servicing fuel system.

INSPECTION END