Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Leaf S >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Power Control System (Power Distribution System)) >> Removal And Installation >> Push-Button Ignition Switch >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the shift selector finisher. Refer to EXPLODED VIEW .
  2. Release the pawl on each side of the push-button ignition switch (1) and remove from the shift selector finisher (2).
    Fig 1: Locating Push-Button Ignition Switch Pawls
    GNSAWMIA1792ZZ-792Courtesy of NISSAN NORTH AMERICA, INC.

    MARU-H : Pawl

  3. Release the pawl on each side and remove the push-button ignition switch from the NATS antenna amp.
scientia non olet · About Mike's Workshop Manuals