Active Test

Test item	Description
BATTERY SAVER	This test is able to check interior room lamp operation On: Operate Off: Non-operation
OUTSIDE BUZZER	This test is able to check Intelligent Key warning buzzer operation On: Operate Off: Non-operation
INSIDE BUZZER	This test is able to check warning chime in combination meter operation Take Out: Take away warning chime sounds when CONSULT screen is touched Key: Key warning chime sounds when CONSULT screen is touched Knob: OFF position warning chime sounds when CONSULT screen is touched Off: Non-operation
INDICATOR	This test is able to check warning lamp operation KEY ON: "KEY" Warning lamp illuminates when CONSULT screen is touched KEY IND: "KEY" Warning lamp blinks when CONSULT screen is touched Off: Non-operation
INT LAMP	This test is able to check interior room lamp operation On: Operate Off: Non-operation
LCD * ¹	This test is able to check meter display information Engine start information displays when "BP N" on CONSULT screen is touched Engine start information displays when "BP I" on CONSULT screen is touched Key ID warning displays when "ID NG" on CONSULT screen is touched Steering lock information displays when "ROTAT" on CONSULT screen is touched P position warning displays when "SFT P" on CONSULT screen is touched INSRT: This item is displayed, but cannot be used BATT: This item is displayed, but cannot be used Take away through window warning displays when "NO KY" on CONSULT screen is touched Take away warning display when "OUTKEY" on CONSULT screen is touched OFF position warning display when "LK WN" on CONSULT screen is touched
LCD * ²	This test is able to check combination meter indicator lamp information BP N: Engine start operation indicator lamp indicate when CONSULT screen is touched BP I: Engine start operation indicator lamp indicate when CONSULT screen is touched ID NG: This item is displayed, but cannot be used ROTAT: This item is displayed, but cannot be used SFT P: Shift P warning lamp indicate when CONSULT screen is touched INSRT: This item is displayed, but cannot be used BATT: Key warning lamp indicator when CONSULT screen is touched NO KY: Key warning lamp indicator when CONSULT screen is touched OUTKEY: Engine start operation indicator lamp indicate when CONSULT screen is touched LK WN: Engine start operation indicator lamp indicate when CONSULT screen is touched
FLASHER	This test is able to check hazard warning lamps operation The hazard warning lamps are activated after "LH/RH/Off" on CONSULT screen is touched
P RANGE	This test is able to check A/T shift selector power supply On: Operate Off: Non-operation
ENGINE SW ILLUMI	This test is able to check push-button ignition switch illumination operation Push-ignition switch illumination illuminates when "ON" on CONSULT screen is touched
LOCK INDICATOR	This test is able to check LOCK indicator (push-button ignition switch) operation On: Operate Off: Non-operation
ACC INDICATOR	This test is able to check ACC indicator (push-button ignition switch) operation On: Operate Off: Non-operation
IGNITION ON IND	This test is able to check ON indicator (push-button ignition switch) operation On: Operate Off: Non-operation
HORN	This test is able to check horn operation On: Operate Off: Non-operation
TRUNK/BACK DOOR	NOTE: This item is displayed, but cannot be used

* ¹ : With information display models

* ² : Without information display models