Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Altima S >> Repair and Diagnosis >> External Pages >> Different car >> Section 703 (Power Control System (Power Distribution System)) >> Removal And Installation >> Push Button Ignition Switch >> Removal And Installation >> Removal

Removal And Installation: Removal

WARNING: This page is about a different car, the 2017 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the instrument lower panel LH. Refer to REMOVAL AND INSTALLATION .
  2. Release the pawl (RARROWF ) on each side of the push-button ignition switch and NATS antenna amp. assembly (1) as shown and remove the push-button ignition switch and NATS antenna amp. assembly from the instrument pad (LH) (2).
    G08683349Courtesy of NISSAN NORTH AMERICA, INC.
  3. Release the pawl on each side of the push-button ignition switch and NATS antenna amp. assembly using a suitable tool, then remove the push-button ignition switch from the NATS antenna amp. assembly.
scientia non olet · About Mike's Workshop Manuals