Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 704 (Audio, Visual & Navigation System (Rear View Monitor System)) >> DTC/Circuit Diagnosis >> Reverse Signal Circuit >> Component Function Check

Component Function Check

WARNING: This page is about a different car, the 2017 Nissan Pathfinder. However, it is still accessible from the selected car via links, so may be relevant.

  1. CHECK REVERSE SIGNAL

    G-20 With CONSULT

    1. Turn ignition ON.
    2. Select "REV SIG" in "DATA MONITOR" mode of "MULTI AV" using CONSULT.
    3. Check "REV SIG" indication as per the following condition.
      Monitor item Condition Indication
      REV SIG Selector lever position R position On
      Other than R position Off

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Proceed to DIAGNOSIS PROCEDURE .

scientia non olet · About Mike's Workshop Manuals