Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 133 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    G-20 CONSULT

    Perform "INSIDE ANT DIAGNOSIS" in "Work support" mode of "INTELLIGENT KEY".

    Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    GO TO STEP 2  .

  2. SELF DIAGNOSTIC RESULT

    G-20 CONSULT

    Perform "Self Diagnostic Result" mode of "IPDM E/R".

    Are any DTCs detected?

    YES 

    Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch.

    Refer to COMPONENT FUNCTION CHECK .

    Is the operation normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the inspection normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 1  .

scientia non olet · About Mike's Workshop Manuals