Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2017 >> Altima Base >> Repair and Diagnosis >> External Pages >> Different car >> Section 128 (Security Control System) >> DTC/Circuit Diagnosis >> DTC P1610: Lock Mode >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    G-20 CONSULT

    1. Turn ignition switch ON.
    2. Select "Self Diagnostic Result" mode of "ENGINE".
    3. Check DTC.

    Is DTC detected?

    YES 

    Go to DIAGNOSIS PROCEDURE .

    NO 

    Inspection End.

scientia non olet · About Mike's Workshop Manuals