DTC Confirmation Procedure
WARNING: This page is about a different car, the 2016 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.
- PERFORM DTC CONFIRMATION PROCEDURE
CONSULT
- Press push-button ignition switch under the following conditions to start engine:
- Shift selector lever: In the P (Park) position.
- Brake pedal: Depressed
- Wait 2 seconds after engine started.
- Select "Self Diagnostic Result" mode of "BCM".
- Check DTC.
Is DTC detected?
YES
GO TO DIAGNOSIS PROCEDURE .
NO
Inspection End.
- Press push-button ignition switch under the following conditions to start engine: