Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 31 (Engine Control System (Introduction, Wiring Diagrams And Basic Inspection)) >> Basic Inspection >> Fuel Pressure Check >> Work Procedure >> Fuel Pressure Release

Fuel Pressure Release

WARNING: This page is about a different car, the 2016 Nissan Versa. However, it is still accessible from the selected car via links, so may be relevant.

  1. FUEL PRESSURE RELEASE

    G-20With CONSULT 

    1. Turn ignition switch ON.
    2. Perform "FUEL PRESSURE RELEASE" in "WORK SUPPORT" mode with CONSULT.
    3. Start engine.
    4. After engine stalls, crank it two or three times to release all fuel pressure.
    5. Turn ignition switch OFF.

    G-21Without CONSULT 

    1. Remove fuel pump fuse located in IPDM E/R.
    2. Start engine.
    3. After engine stalls, crank it two or three times to release all fuel pressure.
    4. Turn ignition switch OFF.
    5. Reinstall fuel pump fuse after servicing fuel system.

    INSPECTION END

scientia non olet · About Mike's Workshop Manuals