Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Versa Note SL >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System (DTC/Circuit Diagnosis) (3 Of 3) >> DTC/Circuit Diagnosis >> DTC P0850: PNP Switch >> Component Function Check >> Diagnostic Test

Diagnostic Test

  1. PERFORM COMPONENT FUNCTION CHECK

    1. Turn ignition switch ON.
    2. Check the voltage between ECM harness connector and ground.
      ECM Condition Voltage
      + -
      Connector Terminal Connector Terminal
      F11 69
      (PNP signal)
      E16 108 Shift lever P or N (CVT)
      Neutral (M/T)
      Battery voltage
      Except above Approx. 0 V

    Is the inspection result normal?

    YES 

    INSPECTION END

    NO 

    Go to DIAGNOSIS PROCEDURE .