Diagnosis Procedure

Regarding Wiring Diagram information, refer to WIRING DIAGRAM .

1. CHECK REAR POWER WINDOW MOTOR RH INPUT SIGNAL
   
   
   1. Turn ignition switch OFF.
   2. Disconnect rear power window motor RH connector.
   3. Turn ignition switch ON.
   4. Check voltage between rear power window motor RH harness connector and ground.

   (+)		(-)	Condition		Voltage (V) (Approx.)
   Rear power window motor RH
   Connector	Terminal
   D304	1	Ground	Rear power window switch RH	NEUTRAL	0
   				UP	Battery voltage
   	2			NEUTRAL	0
   				DOWN	Battery voltage

   Is the inspection result normal?

   YES 

   Replace rear power window motor RH.

   NO 

   GO TO STEP 2  .

2. CHECK REAR POWER WINDOW MOTOR RH CIRCUIT
   
   
   1. Turn ignition switch OFF.
   2. Disconnect rear power window switch RH connector.
   3. Check continuity between rear power window switch RH harness connector and rear power window motor RH harness connector.

      Rear power window switch RH		Rear power window motor RH		Continuity
      Connector	Terminal	Connector	Terminal
      D303	6	D304	2	Yes
      	5		1

   4. Check continuity between rear power window switch RH harness connector and ground.

      Rear power window switch RH		Ground	Continuity
      Connector	Terminal
      D303	6		No
      	5

   Is the inspection result normal?

   YES 

   Replace rear power window switch RH. Refer to REMOVAL AND INSTALLATION .

   NO 

   Repair or replace harness.