Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Audio, Visual & Navigation System (Rear View Monitor System - Display Audio)) >> System Description >> Diagnosis System (Av Control Unit) >> Consult Function >> Configuration

Consult Function: Configuration

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

Configuration has three functions as follows:

Function Description
Read/Write Configuration Before Replace ECU Allows the reading of vehicle specification written in display control unit to store the specification in CONSULT.
After Replace ECU Allows the writing of the vehicle information stored in CONSULT into the display control unit.
Manual Configuration Allows the writing of the vehicle specification into the display control unit by hand.
CAUTION:
  • When replacing display control unit, you must perform "Read / Write Configuration" or "Manual Configuration" with CONSULT.
  • Complete the procedure of "Read / Write Configuration" or "Manual Configuration" in order.
  • If you set incorrect "Read / Write Configuration" or "Manual Configuration", incidents might occur.
  • Configuration is different for each vehicle model. Confirm configuration of each vehicle model.
scientia non olet · About Mike's Workshop Manuals