Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Control System (Power Distribution System)) >> Symptom Diagnosis >> Push-Button Ignition Switch Does Not Operate >> Diagnosis Procedure >> Diagnostic Test

Diagnostic Test

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM WORK SUPPORT

    CONSULT

    Perform "INSIDE ANT DIAGNOSIS" in "Work support" mode of "INTELLIGENT KEY".

    Refer to CONSULT FUNCTION (BCM - INTELLIGENT KEY) .

    GO TO STEP 2  .

  2. SELF DIAGNOSTIC RESULT

    CONSULT

    Perform "Self Diagnostic Result" mode of "IPDM E/R".

    Are any DTCs detected?

    YES 

    Refer to DTC INDEX .

    NO 

    GO TO STEP 3  .

  3. CHECK PUSH-BUTTON IGNITION SWITCH

    Check push-button ignition switch.

    Refer to COMPONENT FUNCTION CHECK .

    Is the operation normal?

    YES 

    GO TO STEP 4  .

    NO 

    Repair or replace malfunctioning parts.

  4. CONFIRM THE OPERATION

    Confirm the operation again.

    Is the inspection normal?

    YES 

    Check intermittent incident. Refer to INTERMITTENT INCIDENT .

    NO 

    GO TO STEP 1  .

scientia non olet · About Mike's Workshop Manuals