Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Power Control System (Power Distribution System)) >> DTC/Circuit Diagnosis >> U1010 Control Unit (Can) >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    CONSULT

    1. Turn the ignition switch ON and wait for 2 seconds or more.
    2. Check "Self Diagnostic Result" mode of "IPDM E/R".
    3. Check DTC.

    Is DTC "U1000" displayed?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO-1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO-2 

    Confirmation after repair: Inspection End.

scientia non olet · About Mike's Workshop Manuals