Mike's Workshop Manuals: Service manuals for every vehicle
Home >> Nissan-Datsun >> 2016 >> Maxima SL >> Repair and Diagnosis >> External Pages >> Different car >> Section 16 (Driver Assistance System (ADAS Control Unit)) >> ADAS Control Unit >> DTC/Circuit Diagnosis >> DTC U1000: Can Comm Circuit >> DTC Description >> DTC Confirmation Procedure

DTC Confirmation Procedure

WARNING: This page is about a different car, the 2015 Nissan Murano. However, it is still accessible from the selected car via links, so may be relevant.

  1. PERFORM DTC CONFIRMATION PROCEDURE

    CONSULT

    1. Start the engine.
    2. Turn the MAIN switch of ICC system ON.
    3. Perform "All DTC Reading" mode.
    4. Check if the "U1000" is detected as the current malfunction in "Self Diagnostic Result" mode of "ICC/ADAS".

    Is "U1000" detected as the current malfunction?

    YES 

    Refer to DIAGNOSIS PROCEDURE .

    NO - 1 

    To check malfunction symptom before repair: Refer to INTERMITTENT INCIDENT .

    NO - 2 

    Confirmation after repair: Inspection End.

scientia non olet · About Mike's Workshop Manuals